一个丰富的FTP啊2006-04-25

chinawwj

ftp://210.27.144.7

有清华高数辅导，清华概率辅导，2004职称英语，洋话连篇，逐渐精通数据库， mcse认证实录合集 等学习资料。 有discovery, 周星驰系列等电影资源，还有有83年射雕连续剧，其他就是软件和mp3
*** CuteFTP 7.0 - build Jun  7 2005 ***

STATUS:>   Getting listing \"\"...
STATUS:>   Connecting to FTP server 210.27.144.7:21 (ip = 210.27.144.7)...
STATUS:>   Socket connected. Waiting for welcome message...
    220 Welcome to qhnu FTP service.
STATUS:>   Connected. Authenticating...
COMMAND:>  USER anonymous
    331 Please specify the password.
COMMAND:>  PASS *****
    230 Login successful.
STATUS:>   Login successful.
COMMAND:>  PWD
    257 \"/\"
STATUS:>   Home directory: /
COMMAND:>  FEAT
    211-Features:
     EPRT
     EPSV
     MDTM
     PASV
     REST STREAM
     SIZE
     TVFS
    211 End
STATUS:>   This site supports features.
STATUS:>   This site supports SIZE.
STATUS:>   This site can resume broken downloads.
COMMAND:>  REST 0
    350 Restart position accepted (0).
COMMAND:>  PASV
    227 Entering Passive Mode (210,27,144,7,33,44)
COMMAND:>  LIST
STATUS:>   Connecting FTP data socket 210.27.144.7:8492...
ERROR:>    The connection failed due to an error or timeout.
    1) Verify that the destination IP address is correct.
    2) Increase the connection timeout threshold under Global Settings | Connection.
    3) Switch to the opposite data connection type (PASV or PORT) under Site Settings | Type tab.
    4) Verify that the problem is not local by trying to connect to an alternate server.
    5) If a server name was used, verify it resolves to the correct address.
    6) If using a local server table for server name resolution, check to see that it doesn't resolve to an obsolete address.
    7) Try pinging the address.
    8) If you are using a router, verify the router is up and running (check by pinging it and then ping an address outside of the router).
    9) Do a traceroute to the destination to verify all routers along the connection path are operational.
    10) Verify that your subnet mask is setup properly.
    11) Verify that your local software or hardware firewall is not blocking outbound connections originating from CuteFTP.
    12) Verify that your anti-virus software is not at fault (try disabling it).
ERROR:>    PASV failed, trying PORT.
STATUS:>   Waiting 0 seconds...
STATUS:>   Getting listing \"/\"...
STATUS:>   Connecting to FTP server 210.27.144.7:21 (ip = 210.27.144.7)...
STATUS:>   Socket connected. Waiting for welcome message...
ERROR:>    Timeout (60000 ms) occurred on receiving server response.
STATUS:>   Waiting 30 seconds...
STATUS:>   ============== Attempt #1 ==============
STATUS:>   Connecting to FTP server 210.27.144.7:21 (ip = 210.27.144.7)...
STATUS:>   Socket connected. Waiting for welcome message...
    220 Welcome to qhnu FTP service.
STATUS:>   Connected. Authenticating...
COMMAND:>  USER anonymous
    331 Please specify the password.
COMMAND:>  PASS *****
    230 Login successful.
STATUS:>   Login successful.
COMMAND:>  PWD
    257 \"/\"
STATUS:>   Home directory: /
STATUS:>   This site supports features.
STATUS:>   This site supports SIZE.
STATUS:>   This site can resume broken downloads.
COMMAND:>  REST 0
    350 Restart position accepted (0).
COMMAND:>  PORT 10,5,51,137,10,18
    200 PORT command successful. Consider using PASV.
COMMAND:>  LIST
    150 Here comes the directory listing.
    226 Directory send OK.
COMMAND:>  PORT 10,5,51,137,10,24
    200 PORT command successful. Consider using PASV.
COMMAND:>  LIST
    150 Here comes the directory listing.
    226 Directory send OK.
COMMAND:>  TYPE A
    200 Switching to ASCII mode.
COMMAND:>  TYPE I
    200 Switching to Binary mode.
COMMAND:>  TYPE I
    200 Switching to Binary mode.

opp19833

very good ,thanks