找回密码
 注册
搜索
热搜: 超星 读书 找书
查看: 1009|回复: 0

[【原创资源】] 雷英杰教授关于论文或学术报告的准备(非常实惠)

[复制链接]
发表于 2006-6-21 09:25:02 | 显示全部楼层 |阅读模式
雷英杰教授关于论文或学术报告的准备,非常实惠:
Preparing a thesis (dissertation) or a professional paper
--------------------------------------------------------------------------------
Typical layout of a Thesis/Professional Paper
Writing a thesis is more a matter of personal style than a matter of guidelines. Thus, no rigid guidelines can be
given to make your decision of how to structure your thesis easier. Remember, it is your thesis after all, and at the
graduate level you are expected to show leadership ability and not just ask for instructions. Then it is you who
must defend it. So the following is one suggested structure but it may not always be suitable depending on the
particular topic and content. The main parts suggested are:
Abstract: Set the stage by stating the goal and the major developments/contributions in non-highly-technical terms
so that the reader has an idea of what to expect and where the emphasis is. In other words say in simple words and
in summary what the thesis is all about.
Introduction: Give the rationale behind the topic. Why is the topic significant? Why does it have sufficient depth
(to justify the degree you are seeking)? What are the difficulties? What are the inherent problems? (In this section
you should be talking about the problem in itself and not in conjunction with a specific solution).
Problem Formulation: In this section you state your problem in technical terms and express it formally (like in
terms of math). This is needed in order to express your problem and its boundaries in unambiguous terms. You
express the constraints and various pertinent assumptions that set the boundaries of your problem space, its
solutions, and its applicability. Remember that this sets the criteria on which your thesis will be judged and
evaluated.
Background: Discuss the properties and behavior of existing methods. Do a preliminary critique. Explain what is
not satisfactory in the existing methods and why you set out for a new method. You must give sufficient
information about the properties of other methods because you must write under the assumption that those
interested in the document of your thesis may not be experts in the field. But you should not extend to
unnecessary detail, or inflate this section artificially to produce bulk. Bulk will not earn you anything, it annoys
reviewers, and it will not fool them. Give complete references to existing material. Be carefull about plagiarism, it
is never acceptable.
Your Approach: Here you lay out all the work you have accomplished in a logical sequence. You provide your
solution in technical detail. This should normally be the biggest section. You have to be very analytical and not
hold anything back. Anyone should be able to recreate your results on the basis of the contents of this section.
This should be technical, complete, and should flow in a logical sequence.
Evaluation/Assessment: Discuss the advantages and disadvantages of your solution. Provide all the measures or
evaluation you came up with. Provide all the results of simulations, tests, and any other scheme of assessment.
Discuss the limitations.
Discussion: Provide a qualitative and quantitative comparison to the other approaches. Take a good look at it as a
whole. Relative advantages/disadvantages and limitations (as compared to other works) should be discussed here.
Further open problems: Where does this subject go from here? What new grounds and questions are opened?
What new ideas are created that could be the subject of further research? If anyone wanted to pursue further the
approach that you took, then what kind of things would he consider further?
Conclusion: In this section you should basically answer the question \"why do I deserve my Ms/PhD degree?\"
Review the contributions of the thesis. What are the original new items in the thesis? what is the significance of
these contributions?
References: Be respectful of other people's work and provide references to it. This complements to a great extent
the background section and provides further reading on all the parts that you have used and which have been
developed by others.
Note that some topics warrant a different order in the appearance of these sections. For example, depending on the
topic it may be more appropriate to give the formulation before the background, if the referencing of this
background needs definitions that you plan to include in your formulation.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

Archiver|手机版|小黑屋|网上读书园地

GMT+8, 2024-11-18 16:23 , Processed in 0.176354 second(s), 19 queries .

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

快速回复 返回顶部 返回列表