NEC本本怪问题解决

bxq_10000

此文在本人博客上发表过，在此现丑了。这是我在帮一位朋友解决它的NEC机子时遇到了问题，时间过去很久了，不记得机子的配置了。只记得故障现象了，贴出来供大家参考。




NEC笔记本开机就提示：
BSP CPU......Err:Microcode
AmIBIOS Power Management Ver.1.10E
(C)Copyr ight 1998,Amer ican Magatrends Im.
Invalid HIBERNATION Partition..run HDPREPEZ or AMI Save to File Utility
多方寻答案没有找到，后来找到NEC官方就该问题发表英文档案材料，大体意思是，出现这个问题是BIOS的误报，你只需要进BIOS中的电源管理选项，将Auto Save-To-File 选项给禁止（disable)就可
以了。
The power management state referred to as Hibernate or Save-To-File (STF) saves the
system’s current working environment to the system’s hard drive, then powers down
the system to conserve battery power. The HDPREPEZ function creates a file large
enough to accommodate the entire memory contents of your system. The STF file is
created the first time that you run your system’s setup program.
When you reboot your NEC Versa FX running the Windows 2000 operating system,
the following warning message appears:
Invalid Hibernation Partition….run HDPREPEZ or AMI Save to File Utility
This warning message is inaccurate. It is not necessary to run HDPREPEZ or the AMI
Save to File utility in the Windows 2000 environment. To disable this warning
message, you must disable the Auto Save-To-File parameter in the system’s BIOS
utility
Follow these steps to disable the Auto Save-To-File
1. 　Reboot your system and press F2 to enter the BIOS utility.'L8C
2. 　Use the arrow keys to highlight and select the Power Management Setup menu.
3. 　Highlight Auto Save-To-File and use the Page Down or Fn and arrow keys to
change the setting to Disabled.~]VS
4.  Press Esc to exit the Power Management Setup menu..s4
5.  Press F10 to save your settings and exit the BIOS utility